We here at Delight India Corporation are a passionate and dedicated team of electrostatic discharge experts.
ESD Ionizer / Eliminator
ESD Ionizer / Eliminator
Neutralise electrostatic charges near your ESD work-station
Static Eliminator Z207 Technical Specifications
| This Bench Top device is designed to neutralise electrostatic charges near your ESD work-station or ESD protected area with a stream of ionized air. It does what Wrist straps and Conductive mats cannot do – i.e. remove static charges from non-conductive objects and surfaces. |
| APPLICATION AREAS |
| Anti-static work stations and assembly units |
| Plastic film and paper industries |
| Plastic manufacturing and moulding units |
| Pharmaceutical industry |
| Clean rooms |
| SPECIFICATIONS |
| Air Flow |
: 1.8 cu m/min |
| Noise level |
: 50 dbA (at 1m) |
| Supply |
: 230V AC 50Hz 20 Watts |
| Ionization voltage |
: 4 – 5 KV |
| Ion balance |
: within (+- 25V). |
| Discharge time |
: +/- 1000V to 100V in < 5sec at 300mm |
| Construction |
: Powder coated ESD safe MS cabinet |
| Dimensions in mm |
: 145 x 90 x 210 |
| Weight |
: 3.00 kgs |
| Warranty |
: One year |
| Conformance |
: ANSI/ESD STM 3.1 |
Static eliminator Bar Z2075 Technical Specifications
| The generation and accumulation of unwanted electrostatic charges on surfaces, poses a serious problem in various industries and processes. For example, static charges can lead to sticking and crumpling of polyester films while being processed on the machines. Collection of dust and other particulate contaminants on surfaces due to static is another example. These specially designed bars can neutralize these disruptive charges. |
| APPLICATION AREAS |
| Plastic film and paper industries, Glass related industries |
| Textile & silk Industries, Pharmaceutical industry, Clean rooms. |
| Specifications: |
| HV Power supply |
: (LBH) 165 x 240 x 190 mm, 9.0 Kg |
| Input Supply |
: 3 PIN 230V AC 50Hz 50 Watts |
| Output voltage |
: 6 – 7 KV AC 5ma |
| No. of bars |
: Maximum 2 |
| Max load |
: Equivalent to 10m of cable including bars |
| Short circuit |
: Protection |
| Construction |
: Powder coated MS cabinet |
| Radiated EMI |
: Internally shielded |
| Ionizing Bar |
: Shockless SS electrodes with 2m cable |
| Neutralising distance |
: 40mm max from needle tip |
| Warranty |
: 12 months |
Static eliminator – 2 fan Technical Specifications
| This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of ionized air. “Ion showering” is the only effective method of removing static charges from non-conductive objects and surfaces. |
| APPLICATION AREAS |
| ESD sensitive work areas and assembly units. |
| Plastic and paper industries |
| IT & Computer industry |
| Clean rooms. |
| Specifications: |
| Input Voltage |
110V/60Hz or 220V/50Hz |
| Current Consumption |
0.9A / 0.45A |
| Operating Temperature |
0-50°c |
| Air Coverage |
40cm x 80cm |
| Size |
600(L) x 170(W) x 116 (H) mm |
| Weight |
4.8 kg |
| Air Volume |
80 – 220CFM |
Static eliminator – 3 fan Technical Specifications
| This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of ionized air. “Ion showering” is the only effective method of removing static charges from non-conductive objects and surfaces. |
| APPLICATION AREAS |
| ESD sensitive work areas and assembly units. |
| Plastic and paper industries |
| IT & Computer industry |
| Clean rooms. |
| SPECIFICATIONS |
| Input Voltage |
: AC220V/50Hz |
| Current Consumption |
: Max 1.25A (Fan high, Light On), Min 0.62A (Fan Low, Light Off) |
| Operating Temperature |
: 0 ℃ ~ +50 ℃ |
| Air Flow Characteristics |
: 400mm. x 1200mm. Area Coverage |
| Air Volume Output |
: Low 120CFM, High 330CFM |
| Size |
: 1100(L) x 180(W) x 120(H) mm |
| Decay Time |
: < 2 sec (1000V ~ 100V at 300mm, at max speed) |
| Ion Balance |
: -20V ~ +20V |
| Lighting Output |
: 1650 Lumens Total |
| Finish |
: Powder Coat |
| Noise level |
: 55 dbA at 1m |
| Weight |
: 7 kgs |
